Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Pressing in sealing flange with sender wheel >
< Removing and installing sealing flange on gearbox side
Golf Mk6
Power unit
4-cylinder diesel engine (2.0 l engine, common rail)
Enginecrankshaft group, pistons
Cylinder block, gearbox end / moving_and_installing_sealing_flange_on_gearbox_side/">Removing and installing sealing flange on gearbox side
Pressing out sealing flange with sender wheel
Pressing out sealing flange with sender wheel
Pressing out sealing flange with sender wheel
–
Remove gearbox
→ Rep. gr.34
.
–
Remove flywheel.
–
Remove intermediate plate.
–
Rotate crankshaft as shown to TDC No. 1 cylinder.
–
Remove sump
→ Chapter
.
Note
t
For reasons of clarity, the work is performed with the engine removed.
t
The procedure is identical whether the engine is installed or removed.
–
Remove engine speed sender -G28-
-arrow-
.
–
Unscrew sealing flange securing bolts.
Note
Sealing flange and sender wheel are pressed off the crankshaft together using 3 M6 x 35 mm bolts.
–
Screw 3 M6 x 35 mm bolts into threaded holes
-arrows-
of sealing flange.
–
Screw bolts (max. 180° per bolt) in sealing flange alternately and press it together with sender wheel off crankshaft.
Power unit
4-cylinder diesel engine (2.0 l engine, common rail)
Enginecrankshaft group, pistons
Cylinder block, gearbox end / moving_and_installing_sealing_flange_on_gearbox_side/">Removing and installing sealing flange on gearbox side
Pressing out sealing flange with sender wheel
Pressing in sealing flange with sender wheel >
< Removing and installing sealing flange on gearbox side