volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Aligning exhaust system free of stress, engine code CJAA > < Aligning exhaust system free of stress

Golf Mk6

Aligning exhaust system free of stress, engine codes CBAA, CBBB, CBAB, CBBA, CBDB, CBDC, CBAC, CBDA
Aligning exhaust system free of stress, engine codes CBAA, CBBB, CBAB, CBBA, CBDB, CBDC, CBAC, CBDA
l  Engine must be cold
   
–  Loosen bolts -3 and 4- on front clamp -1-.
–  Align front clamp -1- to marking -A- on front exhaust pipe -2- (-arrow- points forwards).
l  Dimension -a- = → Fig.
l  The bolts must be on the right and the ends of the bolts must not protrude beyond the lower edge of the clamp.
–  Tighten front clamp bolts -3- hand-tight.
  N26-10302
–  Push rear silencer forwards until dimension -a- = 15…17 mm is attained between mountings for body and rear silencer. -Arrow- points in direction of travel.
–  Align rear silencer horizontally.
–  Tighten clamp bolts in this position. Specified torque → Chapter.
–  Once bolts have been tightened, check distance -a- and correct if necessary.
  N26-10011

Aligning exhaust system free of stress, engine code CJAA > < Aligning exhaust system free of stress