Volkswagen Workshop Service and Repair Manuals > Golf Mk6 > Power unit | 4-cylinder diesel engine (2.0 l engine, common rail) | Fuel preparation system Diesel injection | Senders and sensors | Assembly overview - actuator for structure-borne sound and control unit for structure-borne sound | Assembly overview - actuator for structure-borne soundR214 and control unit for structure-borne soundJ869 (left-hand drive vehic

Assembly overview - actuator for structure-borne soundR214 and control unit for structure-borne soundJ869 (left-hand drive vehicles)

Assembly overview - actuator for structure-borne sound -R214- and control unit for structure-borne sound -J869- (left-hand drive vehicles)

Note

Actuator for structure-borne sound -R214- and control unit for structure-borne sound -J869- are not fitted in all vehicles!

To remove and install, plenum chamber cover and plenum chamber bulkhead must be removed → Body - front; Rep. gr.50.

1 -	Control unit for structure-borne sound -J869-

q	Location: in plenum chamber.

q	To remove and install, plenum chamber cover and plenum chamber bulkhead must be removed.

2 -

8 Nm

3 -

8 Nm

4 -	Bracket for actuator for structure-borne sound -R214-

5 -

15 Nm

6 -

8 Nm

7 -

8 Nm

8 -	Actuator for structure-borne sound -R214-

q	Location: in plenum chamber.

q	To remove and install, plenum chamber cover and plenum chamber bulkhead must be removed.

9 -	Bracket for control unit for structure-borne sound -J869-

10 -

8 Nm