volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Exhaust turbocharger, G-charger > < Removing and installing radiator

Golf Mk6

Removing and installing radiator cowling with radiator fan
Removing and installing radiator cowling with radiator fan
Removing
–  Remove engine cover panel → Chapter.
–  Remove air filter housing with air mass meter and connecting pipe → Chapter.
   
–  Unscrew upper bolts -top arrows- of air cowling.
–  Remove noise insulation → General body repairs, exterior; Rep. gr.66.
  A19-0473
–  Remove connecting hose »hot side« to charge air pipe. To do this, loosen hose clamps -1- and -2-.
  A21-10488
–  Disconnect connector -1-.
–  Unscrew lower bolts -lower arrows-.
–  Remove cowling with radiator fans upwards.
  A19-0473
–  Expose connector -1- and (if present) -2- and cables.
–  Unscrew nuts -arrows- and remove radiator fan.
Installing
Install in reverse order.
  N19-10054

Exhaust turbocharger, G-charger > < Removing and installing radiator