Golf Mk6
Assembly overview - ignition system |
1 - | Cable guide |
2 - | 8 Nm |
3 - | Cover |
4 - | Connector |
5 - | Hall sender -G40- |
q | Renew O-ring. |
q | Location: cylinder head cover. |
6 - | 10 Nm |
7 - | Spark plug connector with ignition cable |
Note markings on ignition cables. |
t | D Ignition transformer = ignition cable cyl. 1 |
t | B Ignition transformer = ignition cable cyl. 2 |
t | C Ignition transformer = ignition cable cyl. 3 |
t | A Ignition transformer = ignition cable cyl. 4 |
8 - | Spark plug, 25 Nm |
q | Remove and install with puller -T10112 A- and spark plug socket and extension -3122 B-. |
q | Type and electrode gap → Chapter. |
9 - | Knock sensor 1 -G61- |
q | Fitting location: below intake manifold on cylinder block. |
10 - | Connector |
11 - | 20 Nm |
q | The specified torque influences the function of the knock sensor. |
12 - | Ignition transformer -N152- |
Note markings on ignition cables. |
t | D Ignition transformer = ignition cable cyl. 1 |
t | B Ignition transformer = ignition cable cyl. 2 |
t | C Ignition transformer = ignition cable cyl. 3 |
t | A Ignition transformer = ignition cable cyl. 4 |
13 - | Engine speed sender -G28- |
q | Fitting location: on gearbox side below intake manifold. |
q | Remove and install → Chapter |
14 - | 5 Nm |
15 - | 7 Nm |