| –
| Place plastic sleeve supplied on respective valve stem. This will prevent damage to new valve stem seal. |
| –
| Place new valve stem seal in valve stem seal fitting tool -3365-. |
| –
| Oil valve stem seal sealing lip and press carefully onto the valve guide. |
| Further assembly is basically the reverse of the dismantling sequence. In the process, note the following: |
| t
| Removing and installing valve timing housing (Eos, Golf Plus, Golf, Scirocco, Polo, Sharan, Golf Cabriolet) → Chapter |
| t
| Removing and installing valve timing housing (Tiguan, Touran) → Chapter |
| t
| Remove valve timing housing (Passat, Passat CC) → Chapter |
|
|
|
