Note t
| After working on the exhaust system, ensure that the system is not under stress and that there is sufficient clearance to the bodywork. If necessary, loosen clamping sleeve and align silencer and exhaust pipe so that sufficient clearance is maintained to the bodywork and the support rings are evenly loaded. |
t
| Renew self-locking nuts. |
Caution Avoid damage to the flexible joint. |
t
| Do not bend decoupling element more than 10°. |
t
| Install decoupling element so that it is not under tension. |
t
| Take care not to damage wire mesh on decoupling element. |
|
|
|
|