To prevent injuries to persons and/or damage to the injection and ignition system, the following must be observed: |
t
| Do not touch or disconnect ignition cables when the engine is running or being turned at starter speed. |
t
| Switch off ignition before connecting or disconnecting injection and ignition system wiring as well as test instrument cables. |
Note the following if testers and measuring instruments have to be used during a road test: |
t
| Test and measuring instruments must always be secured to rear seat and operated by a second person from this location. |
If test and measuring instruments are operated from front passenger seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered. |
If the engine is to be turned at starter speed without starting: |
The readiness code must be generated if the fault memory has been erased. |
|
|
|