volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Checking quantity injected > < Checking injectors for leaks and quantity injected (vehicles model year 2006 ?)

Golf Mk6

Checking for leaks
Checking for leaks
  WARNING
Fuel system is under pressure! Wear eye protection and protective clothing to avoid possible injury and skin contact. Before loosening hose connections, wrap a cloth around the connection. Then release pressure by carefully pulling hose off connection.
Test prerequisite
l  The fuel pressure must be OK. Checking → Chapter.
   
–  Pull connectors -arrows- off all injectors.
–  Unclip wiring harness for injectors.
–  Detach fuel rail from intake manifold.
–  Pull fuel rail with injectors out of intake manifold (fuel lines remain connected).
–  Remove rear seat bench.
–  Remove cover from fuel delivery unit.
  N15-10082
–  Connect remote control for V.A.G 1348 -V.A.G 1348/3A- to contact -5- of fuel pump and battery positive (+) using adapter cables from auxiliary measuring set -V.A.G 1594C-.
–  Connect contact -1- on connector and contact -1- on fuel pump using adapter cables from auxiliary measuring set -V.A.G 1594C-.
  Note
This step serves only to have the fuel pump running when the engine is stopped.
–  Check injectors for leaks (visual check). No more than 1 to 2 drops per minute must escape from each valve when fuel pump is running.
If the fuel loss is greater:
–  Renew leaking injector → Chapter.
  Note
Always renew seals.
  N20-10480

Checking quantity injected > < Checking injectors for leaks and quantity injected (vehicles model year 2006 ?)