–
| Turn crankshaft until cams of supporting element to be tested are at top. |
–
| Press roller rocker finger down using a screwdriver -arrow-. |
If it is possible to insert a feeler gauge of 0.20 mm between camshaft and roller rocker finger: |
–
| Renewing supporting element; removing camshaft to do so → Chapter. |
Note t
| After installing the camshaft, wait for about 30 minutes before starting the engine. The hydraulic compensation elements must settle (otherwise valves will strike pistons). |
t
| After working on the valve gear, turn the engine carefully at least 2 rotations to ensure that none of the valves make contact when the starter is operated. |
|
|
|