volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing camshaft oil seal

Golf Mk6

Removing
Removing
–  Remove toothed belt guard upper part.
   
–  Set camshaft pulley to “TDC” No. 1 cylinder mark by turning crankshaft. Marking on camshaft toothed belt pulley must align with arrow on toothed belt guard.
–  Release tensioning roller and remove toothed belt from camshaft toothed belt pulley.
–  Turn crankshaft back slightly.
  A13-0691
–  Remove camshaft toothed belt pulley. When loosening camshaft toothed belt pulley bolt, hold with counterhold tool -3415-.
–  Remove Woodruff key from camshaft.
–  Screw camshaft toothed belt pulley securing bolt into camshaft to stop.
–  Unscrew inner part of oil seal extractor -2085- 2 turns (approx. 3 mm) from the outer part and lock in position with the knurled screw.
  N15-0455
–  Lubricate threaded head of oil seal extractor, place it in position and, exerting firm pressure, screw it into oil seal as far as possible.
–  Loosen knurled screw and turn inner part against camshaft until oil seal is pulled out.
–  Clamp flats of oil seal extractor in vice. Remove oil seal with pliers.
  N15-0452

Installing > < Renewing camshaft oil seal