–
| Fit valve assembly tool -2036- and adjust mountings to height of studs. |
–
| Screw pressure hose -VW 653/3- into spark plug thread. |
–
| Connect pressure hose to compressed air at a pressure of at least 6 bar. |
–
| Remove valve springs using valve lever -VW 541/1 A- and press tool -VW 541/6-. |
Note Tight cotters can be loosened by tapping lightly on lever. |
–
| Pull out valve stem seals using valve stem seal puller -3364-. |
|
|
|