Golf Mk6
| Assembly overview - sealing flange |
| 1 - | 15 Nm |
| 2 - | Seal |
| q | PTFE-type oil seal |
| q | Identification: Without inner hose spring. |
| q | Do not additionally oil or grease the oil seal sealing lip. |
| q | Renewing → Chapter. |
| 3 - | Front sealing flange |
| q | Must seat on dowel sleeves. |
| q | Removing and installing → Chapter. |
| q | Remove sump in order to remove and install. |
| 4 - | Stud, 10 Nm |
| q | Renew. |
| 5 - | Cylinder block |
| q | Removing and installing crankshaft → Chapter. |
| q | Dismantling and assembling pistons and conrods → Chapter. |
| 6 - | Seal |
| q | Renew. |
| 7 - | 100 Nm |
| 8 - | 60 Nm + turn 90° further |
| q | Renew. |
| 9 - | Flywheel/drive plate |
| q | When removing and installing flywheel, lock with counterhold tool -3067-. |
| q | Removing and installing drive plate → Chapter. |
| 10 - | Intermediate plate |
| q | Must seat on dowel sleeves. |
| q | Do not damage or bend when assembling. |
| 11 - | Sealing flange with oil seal |
| q | Removing and installing → Chapter. |
