Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing front exhaust pipe with catalytic converter >
< Assembly overview - exhaust system
Golf Mk6
Power unit
4-cylinder injection engine (1.6 l roller rocker finger)
Exhaust system / Exhaust system, engine codes BGU, BSE, BSF, CCSA
Separating centre and rear silencers
Separating centre and rear silencers
Separating centre and rear silencers
t
The connecting pipe can be cut through at the point marked in order to renew the centre and rear silencers separately.
t
Cutting location is marked by an indentation on circumference of exhaust pipe.
Special tools and workshop equipment required
t
Pneumatic sabre saw -V.A.G 1523 A-
t
or chain pipe cutter -VAS 6254-
t
Eye protection
WARNING
To avoid injury from metal shavings, wear eye protection and protective clothing.
–
Cut through exhaust pipe at right angles using e.g. pneumatic sabre saw -V.A.G 1523 A- at separating point
-arrow 2-
.
–
When installing, position clamp
-4-
at side markings
-arrow 1-
and
-arrow 3-
.
–
Install clamp so that end of bolt does not extend beyond lower edge of clamp.
l
Bolted connection faces rear.
–
Align exhaust system free of tension
→ Chapter
.
Power unit
4-cylinder injection engine (1.6 l roller rocker finger)
Exhaust system / Exhaust system, engine codes BGU, BSE, BSF, CCSA
Separating centre and rear silencers
Removing and installing front exhaust pipe with catalytic converter >
< Assembly overview - exhaust system