Golf Mk6
| Assembly overview - ignition system |
| 1 - | Knock sensor 1 -G61- |
| q | On front of cylinder head below intake manifold. |
| q | Removing and installing → Chapter |
| q | Gold-plated contacts. |
| 2 - | 20 Nm |
| q | The specified torque influences the function of the knock sensor. |
| 3 - | Ignition coil with output stage -(N70, N127, N291, N292)- |
| q | Removing and installing → Chapter |
| 4 - | Spark plug, 25 Nm |
| q | Type and electrode gap → Chapter. |
| q | Remove and install with spark plug socket and extension -3122 B-. |
| 5 - | O-ring |
| q | Renew |
| 6 - | Engine speed sender -G28- |
| q | At lower left of front cylinder block, next to coarse oil separator → Fig. |
| q | Removing and installing → Chapter |
| 7 - | 10 Nm |
| 8 - | Hall sender -G40- |
| q | In front cylinder head cover. |
| q | Gold-plated contacts. |