volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Fuel supply system - Petrol engines > < Removing and installing suction-jet pump

Golf Mk6

Removing and installing suction-jet pump
Removing and installing suction-jet pump
  Note
t  On vehicles with four-wheel drive, fuel must be pumped from the area of fuel gauge sender 2 -G169-, to the fuel pump with a suction-jet pump due to the shape of the fuel tank.
t  Checking is only necessary if the engine stops due to lack of fuel, even though the fuel gauge shows that the tank is still 1/4 full.
Procedure
–  Remove fuel delivery unit → Chapter.
   
–  Pull return hose of suction-jet pump out of fuel delivery unit -arrow-.
–  Separate quick-release coupling of supply line from suction-jet pump on Y-piece of fuel delivery unit.
–  Remove fuel gauge sender 2 -G169- → Chapter.
–  Now the suction-jet pump can be pulled out from the side of the fuel gauge sender 2 -G169- (left side of vehicle).
–  Check that the fuel lines on suction-jet pump are fitted securely and are not damaged.
–  Additionally check suction-jet pump for possible soiling.
  N20-0279

Fuel supply system - Petrol engines > < Removing and installing suction-jet pump