Golf Mk6
Assembly overview - activated charcoal filter system (engine codes CBTA, CBUA) |
1 - | Activated charcoal filter |
q | Only installed with engine code CBUA |
2 - | 8 Nm |
3 - | Bush |
4 - | Activated charcoal filter |
q | Location: down in spare wheel well |
q | Removing and installing → Chapter. |
5 - | 6 Nm |
6 - | Bracket |
7 - | Support |
8 - | Bracket |
9 - | 4 Nm |
10 - | Rubber grommet |
11 - | Washer |
12 - | 8 Nm |
13 - | Breather line |
q | To engine. |
14 - | Fuel system diagnostic pump -V144- |
q | Fitting location: In rear right wheel housing beneath liner |
q | Check → Vehicle diagnostic tester. |
q | Removing and installing → Chapter. |
15 - | 4 Nm |
16 - | Connecting hose |
17 - | Clip |
18 - | Air filter |
q | For fuel system diagnostic pump -V144- |
q | No maintenance specification |
19 - | Bracket |
20 - | Connecting pipe |
q | Clip onto bracket. |
q | To pull off, press release button on connection. |
21 - | Breather line |
q | To fuel filler neck on fuel tank |
q | To pull off, press release button on connection. |
22 - | Breather line |
q | To pull off, press release button on connection. |
23 - | Breather line |
q | To activated charcoal filter solenoid valve 1 -N80- |
q | To pull off, press release button on connection. |