volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Wheels, tyres. axle align > < Removing and installing shock absorber for adaptive chassis control DCC (four-wheel drive)

Golf Mk6

Repairing shock absorber for adaptive chassis control DCC (four-wheel drive)
   
Repairing shock absorber for adaptive chassis control DCC (four-wheel drive)
1 - Shock absorber with rear left/right shock absorber damper adjustment valve -N338/N339-
q   Removing and installing → Chapter.
2 - Protective cap
3 - Protective tube
4 - Bump stop
q   Allocation → Electronic parts catalogue „ETKA“
5 - Shock absorber mounting
q   Allocation → Electronic parts catalogue „ETKA“
6 - Nut
q   M10 x 1.0
q   25 Nm
q   Always renew after removing.
q   Loosening and tightening → Fig.
7 - Cover

Dismantling and assembling shock absorber
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1332-
  W00-0428
t  Shock absorber set -T10001-
  W00-0497
Loosening and tightening threaded connection for shock absorber mounting
1 - Commercially available ratchet handle
2 - Socket -T10001/9-
3 - Ratchet handle -T10001/11-
4 - Socket -T10001/1-
  N42-0266
Specified torque
ComponentSpecified torque
Shock absorber mounting to shock absorber
t  Use new nut
25 Nm

   

Wheels, tyres. axle align > < Removing and installing shock absorber for adaptive chassis control DCC (four-wheel drive)