volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear bass loudspeakers > < Removing and installing loudspeakers, Golf saloon

Golf Mk6

Removing and installing front bass loudspeakers
Removing and installing front bass loudspeakers
  Note
Removal and installation is performed in the same manner on the left and right sides.
Removing:
Before beginning dismantling work, perform the following steps:
–  Switch off ignition and all electrical consumers and remove ignition key.
Before a loudspeaker can be renewed, the door trim must be removed → General body repairs, interior; Rep. gr.70 or → General body repairs, interior; Rep. gr.70.
   
–  Release connector catch on loudspeaker -arrows- and disconnect connector.
  N91-11140
–  Drill out rivets -arrows- using suitable drill bit and remove loudspeaker.
  Note
t  It is essential that all swarf be removed from the door because otherwise corrosion damage will occur.
t  If, when drilling out rivets, damage to the paintwork is caused, rectify the damage immediately.
Installing:
–  Insert loudspeaker and secure with four rivets.
  Note
When installing new loudspeaker, secure with special pop rivets (note part number).
–  Reconnect connectors on loudspeaker.
Remainder of installation is carried out in reverse order of removal.
  N91-11139

Removing and installing rear bass loudspeakers > < Removing and installing loudspeakers, Golf saloon