Switch off ignition and all electrical consumers and remove ignition key.
Carry out procedure as follows:
–
Using removal wedge -3409-, carefully lever out centre console cover in area of -arrows- and remove cover.
–
Remove bolts -arrows- from radio or radio navigation system.
–
Pull radio or radio navigation system out of installation slot far enough so as to allow access to the connectors on the back of the radio or radio navigation system.
–
Press together connector locking mechanism in direction of -arrows-.
–
Then swing locking bar up in direction of -arrow- and pull out connectors.
–
Release connectors -arrows- on aerial connections and pull these out.