volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Coding cornering light and headlight range control unitJ745 > < Removing and installing cornering light and headlight range control unitJ745

Golf Mk6

Removing and installing control unit for cornering light and headlight range controlJ745, vehicles for USA and Canada
Removing and installing control unit for cornering light and headlight range control -J745-, vehicles for USA and Canada
Removing:
–  Remove glove compartment → General body repairs, interior; Rep. gr.68.
   
–  Remove securing bolts -arrows-.
–  Remove control unit -1- from installation position taking connected wire length into account.
  N94-12499
–  Press locking lug -arrow- and swing arm -1- in direction of -arrow 2- and pull off connector.
Installing:
Installation is carried out in the reverse order. When installing observe the following:
  Note
The new cornering light and headlight range control unit must be coded once it is installed → Chapter. Then subsequently perform the basic setting of the headlights: „Maintenance manual“ → Booklet.
–  Check headlight functions.
–  Checking headlight settings and adjusting headlight if necessary: „Maintenance manual“ → Booklet
  N94-10740

Coding cornering light and headlight range control unitJ745 > < Removing and installing cornering light and headlight range control unitJ745