Volkswagen Workshop Service and Repair Manuals > Golf Mk6 > Vehicle electrics | Electrical system | Lights, lamps, switches outside | Steering column switch, vehicles from 06/2010 | Steering column combination switchE595 | Removing and installing steering column combination switchE595 (manufacturer: Valeo)

Removing and installing steering column combination switchE595 (manufacturer: Valeo)

Removing and installing steering column combination switch -E595- (manufacturer: Valeo)

Caution

The removal and installation of individual components of the steering column switch must be performed in a specified sequence → Chapter.

Removing:

–	Remove steering wheel → General body repairs, interior; Rep. gr.69.

–	Remove steering column trim → General body repairs, interior; Rep. gr.68.

–	Remove steering column electronics control unit -J527- → Chapter.

–	Release the 3 fasteners -arrows- and pull complete steering column combination switch -E595- straight to rear off steering column switch base.

Installing:

–	Push steering column combination switch -E595- straight into guides on steering column switch base until it securely engages.

–	Install all parts in reverse order of removal.

Volkswagen Workshop Service and Repair Manuals