Golf Mk6
Assembly overview |
1 - | Multi-point socket head bolt |
q | M8 x 45 |
q | 23 Nm |
2 - | Upper tensioning roller |
3 - | Timing case |
4 - | Hexagon flange bolts |
q | M8 x 45 |
q | 23 Nm |
5 - | Hexagon flange nut |
q | M8 |
q | Securing nut for B+ wire on rear of alternator |
q | 15 Nm |
6 - | Cross-head screw |
q | M5 x 21 |
q | 4.5 Nm |
7 - | Hexagon nut, flat |
q | M8 |
8 - | Washer |
q | M5 |
9 - | Protective cap |
10 - | Cross-head screws |
q | M4 x 19 |
q | 2 Nm |
11 - | Cross-head screw |
q | M4 x 13 |
q | 2 Nm |
12 - | Voltage regulator |
q | Removing and installing voltage regulator → Chapter |
13 - | Alternator |
q | Removing and installing alternator → Chapter |
q | Checking alternator → Chapter |
q | Securing B+ wire to alternator → Chapter |
q | Removing and installing poly V-belt pulley on alternator → Chapter |
14 - | Poly V-belt |
q | Poly V-belt routing → Engine; Rep. gr.13 |
q | Checking poly V-belt → Chapter |
15 - | Hexagon head flange bolts |
q | M8 x 90 |
q | 23 Nm |
16 - | Centring sleeves |
q | Insert in bracket before installing air conditioner compressor |
q | Air conditioner compressor securing bolts to bracket (M8 x 100) 23 Nm |
17 - | Lower tensioning roller |
18 - | Bracket |
q | For tensioning element and air conditioner compressor |
19 - | Hexagon head flange bolt |
q | M10 x 65 |
q | 45 Nm |
|