Golf Mk6
Assembly overview |
1 - | Hexagon head flange bolt |
q | M8x110 |
q | 20 Nm |
2 - | Cross-head screws |
q | M4x19 |
q | 2 Nm |
3 - | Washer |
q | M5 |
4 - | Cross-head screw |
q | M5x21 |
q | 4.5 Nm |
5 - | Hexagon nut |
q | M8 |
q | 15 Nm |
6 - | Hexagon nut, flat |
q | M8 |
7 - | Protective cap for alternator |
8 - | Cross-head screw |
q | M4x13 |
q | 2 Nm |
9 - | Voltage regulator |
q | Removing and installing voltage regulator → Chapter |
10 - | Alternator |
q | Removing and installing alternator → Chapter |
q | Checking alternator → Chapter |
q | Securing B+ wire to alternator → Chapter |
q | Removing and installing poly V-belt pulley → Chapter |
11 - | Poly V-belt |
q | Removing and installing → Engine; Rep. gr.13 |
q | Checking → Chapter |
q | Poly V-belt routing → Engine; Rep. gr.13 |
|