| Voltage stabiliser -J532- |
| The voltage stabiliser -J532- is installed in the dash panel insert behind the glove compartment. It has the task of stabilizing to 12 volts the high voltage fluctuations generated in the onboard supply by the start/stop operation. |
| Effects in case of voltage stabiliser failure: |
| If the voltage stabiliser is defective, devices such as the radio, radio navigation or telephone will perform a reset if their own voltage supply is not sufficient when the starter is operated. If, in start/stop mode, the mentioned electrical consumers are identified as causing a reset for each motor start, this indicates a defective voltage stabiliser. A direct entry concerning a malfunction of the voltage regulator, e.g. in the event memory of the diagnostic interface or the onboard supply control unit, does not occur at present. If radio, radio navigation and telephone units fail together, first check fuse of voltage regulator. |
|
|
|
