volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear window wiper motorV12 > < Assembly overview - rear window wiper system

Golf Mk6

Removing and installing wiper arm
   
Removing and installing wiper arm
Special tools and workshop equipment required
t  Torque wrench -V.A.G 1331-
Removing:
–  Allow wiper to come to park position.
  W00-0427
–  Lift up cover -1- of rear window wiper and unclip cover.
–  Loosen but do not completely remove securing nut -arrow-.
–  Lift up wiper arm and free off from taper by rocking from side to side.
–  Remove completely securing nut -arrow- and detach wiper arm.
Installing:
–  To move wiper motor to park position, switch rear window wiper on and off with ignition on.
  N92-10447
–  Fit wiper arm in approximate park position on wiper arm shaft and tighten securing nut -arrow- by hand.
  Note
Wiper arm securing nut -arrow- is not tightened to specified torque until wiper blade park position has been adjusted.
–  Adjust rear window wiper park position → Chapter.
  N92-10447

Removing and installing rear window wiper motorV12 > < Assembly overview - rear window wiper system