| To remove the wiper blades, the wiper arms should be placed in the „service/winter position“. The „service/winter position“ is activated within 10 seconds after ignition is switched off by pressing windscreen wiper lever in „tip wipe“ position → Operating manual of vehicle. |
Note | The following descriptions of the windscreen wiper system refer to a LHD vehicle. Unless the description states otherwise, the individual modules are removed and installed using the corresponding mirror-image procedure in RHD vehicles. |
| Fault detection and fault display: |
| The onboard supply control unit -J519- features self-diagnosis to facilitate fault finding. |
| For fault finding, use vehicle diagnosis, testing and information system -VAS 5051A- in „Guided fault finding“ mode. |
|
|
|
Caution
