| Removing and installing joint-free wipers |
Note | t
| Driver and front passenger wiper blades must not be interchanged during installation. |
| t
| Joint-free wipers are very flexible. To lift the wiper blades off the windscreen, touch them only in the area in which the wiper blades are attached to the wipers. |
| t
| To remove the wiper blades, the wiper arms should be placed in the „service/winter position“. The „service/winter position“ is activated within 10 seconds after ignition is switched off by pressing the windscreen wiper lever in position „tip wipe“. |
| –
| Place wiper arms in „service/winter position“ by pressing windscreen wiper lever to „flick wipe“ position 10 seconds after ignition has been switched off. |
|
|
|
