Golf L4-2.0L (AZG) (2004)
Fuel Flow Sensor: Locations
Fuel Tank, Removing and Installing
Fuel tank, removing and installing
Special tools and equipment
-
V.A.G. 1331 Torque wrench (5 to 50 Nm)
-
V.A.G. 1383 A Engine and transmission jack
Removing
Note:
^
Observe safety precautions before starting work.
^
The fuel extraction unit VAS 5190 is recommended for emptying the fuel tank.
-
Check whether a coded radio is installed. If so, obtain anti-theft coding.
-
With ignition switched off disconnect battery Ground strap.
-
Open fuel flap.
-
Drain fuel tank and clean fuel filter neck and surrounding area.
-
Remove securing bolt on filler neck.
-
Fold rear seat bench forward.
-
Remove cover from under fuel tank.
-
Remove rear axle
WARNING:
^
The fuel system is under pressure! Before opening the system place a cloth around the connection. Then release the pressure by
carefully loosening the connection.
^
Always wear eye protection and wear fuel resistant gloves when disconnecting system connections.
-
Remove cover from fuel delivery unit.