volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Fuel Tank, Removing and Installing|Page 581 > < Fuel Tank, Removing and Installing
Page 2
background image

-

Disconnect 4- pin connector off flange (arrow).

-

Remove cover from under the fuel tank (arrow)

-

Disconnect return hose -2- (blue), supply hose -1- (black) and breather hose -3- (white) at connecting point.

Note:  To do this, press buttons on hose couplings.

WARNING:  
^

The fuel system is under pressure! Before opening the system place a cloth around the connection. Then release the pressure by
carefully loosening the connection.

^

Always wear eye protection and wear fuel resistant gloves when disconnecting system connections. 

-

Seal the lines so that the fuel system is not contaminated by dirt etc.

-

Remove tensioning strap. When doing this support fuel tank with engine and transmission jack V.A. G 1 383 A.

-

Lower fuel tank.

Installing

Installation is performed in reverse order to removal, note the following:
^

Install breather and fuel hoses free of kinks.

^

Secure fuel hoses with spring-type clips

^

Ensure fuel hoses are tight.

Fuel Tank, Removing and Installing|Page 581 > < Fuel Tank, Removing and Installing