Golf GL L4-2.0L (AZG) (2001)
/Page-2174001.png)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
Replacing airbag unit after an accident
Accident where airbag deployed
Always replace following:
-
All deployed airbag units with control modules and sensors
-
Support for front passenger module
-
Return spring with slip ring
-
Seat cover and cover clips, if side airbag is deployed.
-
All airbag wiring harnesses for side airbag in seat, if unit is deployed.
-
All seatbelts with belt tensioners that have been triggered
-
As necessary (visual inspection): all damaged components
In case of side curtain airbag deployment exchange following additional components:
-
Pillar Trims (A, B and C Pillar Trims).
-
Door seal.
-
Guide piece for head airbag.
-
Bracket for grab handle
-
Headliner.
-
Reading light rear.*
-
Grab handle.*
-
Connecting strip (for headliner).*
-
*) Components could be used up to 6 times.
Accident not involving activation of airbag
If airbag Malfunction Indicator Lamp (MIL) K75 does not indicate a DTC, airbag components do not need to be replaced.
CAUTION! Seat belts should be checked separately.
-
When replacing an airbag unit or airbag control module, affix stickers (only tear-off strips) to registration card and return registration card to
relevant dealer or to Importer for registration.
-
See your Parts Department for proper registration procedure.
-
Registration card must be ordered separately.