Golf III L4-1984cc 2.0L SOHC (1993)
-
Remove door sill trim.
-
Pull back carpeting in area of door sill and locate threaded hole -A- in lower side member.
-
Punch hole in carpeting in line with threaded hole.
-
Reinstall carpeting and door sill trim.
-
Install tongue and anchor assembly from kit
^
Bolt -arrow-
tightening torque: 40 Nm (30 ft lb)
-
Install cover cap over bolt.
-
Place child seat on front passenger seat.
-
Buckle both ends of child seat belt and adjust snugly over child seat by pulling loose end of webbing to tighten seat belt.
