Golf III L4-2.0L (ABA) (1995)
Fluid Filter - A/T: Service and Repair
096 Transmission
VALVE BODY, 096 TRANSMISSION
Valve body, removing and installing
CAUTION!
Do not run the engine or tow the vehicle with oil pan removed or when there is no ATF in the transmission.
Note:
-
The valve body can also be removed when the transmission is installed.
-
On vehicles with 6-cylinder engine, remove the starter.
-
After re-installing the oil pan, fill with ATF.
-
Always replace a valve body that is fouled or malfunctioning.
1
- Oil pan
2
- Bolt
- Tightening torque: 12 Nm (9 ft lb)
3
- Gasket
- Always replace
- Press spacer bushings into gasket
4
- Spacer bushing
- Press into gasket
5
- Bolt
- Tightening torque: 8 Nm (71 in lb)
6
- ATF screen
- Press into gasket
- Installing - Fig. 5