Golf III L4-2.0L (ABA) (1995)
-
Installing stop ring
^
Install stop ring, together with pipe piece 2010, in synchronizer hub/5th gear, (ribs arrows 1) lock into openings (arrow 2) for locking parts
of synchronizer)
^
Remove pipe piece 2010, locking ribs into synchronizer
5
Spring
6
5th gear operating sleeve
-
Installation position of 5th gear operating sleeve
^
Slide operating sleeve over synchronizer hub
^
Recesses for locking keys in synchronizer hub and operating sleeve must be aligned
^
Chamfer on teeth (arrow 1) is toward shaft (arrow 2) of 5th gear synchronizer
^
Insert locking keys and install springs at 120° offset. Angled ends of each spring must engage in hollow keys