GTI L4-2.0L Turbo (BPY) (2007)
/Page-2692010.png)
-
Turn adjuster -arrow- in direction needed to bring rear light in alignment with bumper cover as illustrated above.
-
Tighten nuts -1- to specified tightening torque.
Rear Light Adjuster, Removing and Installing
Rear Light Adjuster, Removing And Installing
NOTE: Rear lights from 11.05 production include an adjuster that enables even alignment of rear light housing relative to the bumper cover.
Removing:
-
Remove rear light.
-
Depress locking clips -arrow A- on adjuster -1- and press in direction of -arrow B- from rear body sheet metal.
Installing:
