volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Relay Panel Integrated With Vehicle Electrical System Control Module J519, Removing and Installing|Page 9088 > < Relay Panel Integrated With Vehicle Electrical System Control Module J519, Removing and Installing|Page 9086
Page 4
background image

NOTE:  It depends on vehicle equipment whether an auxiliary relay carrier is installed.

-

Pull E-box bracket -1- as far as cable lengths permit from upward stud bolts.

-

Unclip auxiliary relay carrier -1- sideways out of E-box bracket -2-.

-

Remove E-box bracket -2- from vehicle.

Installing: 
Install in reverse order of removal, noting the following:

-

Reconnect wires -1- to E-box in allocation marked during removal.

-

Tighten all threaded connections using the specified torques.

Vehicles --> 05.04: 

NOTE:  Ensure E-box cover engages correctly -arrows-.

Vehicles 05.04 -->: 

Relay Panel Integrated With Vehicle Electrical System Control Module J519, Removing and Installing|Page 9088 > < Relay Panel Integrated With Vehicle Electrical System Control Module J519, Removing and Installing|Page 9086