GTI L4-2.0L Turbo (BPY) (2007)
/Page-1636004.png)
-
Slide single wire seal -A- into terminal housing until it stops using the corresponding assembly tool -B-.
-
Shorten repair wire and single wire of vehicle-specific wiring harness according to your needs using Wire Stripper VAS1978/3.
-
Crimp the stripped ends of repair wire and single wire of vehicle-specific wiring harness using crimp pliers and a crimp connection as described in
chapter "Wire break with single repair point".
Repairing terminal housings with insulation displacement terminal
