GTI L4-2.0L Turbo (BPY) (2007)
^
Torque wrench VAG 1331
Removing
-
Remove rear wheels.
Note: The following work steps are described for left side of vehicle. These work steps also apply to right side of vehicle.
-
Remove nut - 1 - and pull coupling rod - 2 - out of stabilizer bar.
Note: Do not loosen bolt - arrow - for tie rod - 3 -.
-
Remove bolts - arrows - for stabilizer bar clip.
-
Remove stabilizer bar.
Installing
-
Install stabilizer bar into vehicle.