GTI L4-2.0L Turbo (BPY) (2007)
-
Remove longitudinal control arm.
-
Attach tools as depicted in illustration.
1. Tube T10230/3
2. Press piece T10230/10
3. Installation device 3372
4. Thrust plate VW 401
5. Thrust plate VW 402
-
Press out bonded rubber bushing.
Pressing in bonded rubber bushing
-
Place longitudinal control arm on a level.
-
Mark a vertical line on to bushing of trailing link.
Dimension - A - = 114 mm.
There are 2 different bonded rubber bushings. For both, the marked line must lie between raised points - 1 - after pressing in.