GTI V6-2.8L (AFP) (1999)
Brake Pedal Assy: Service and Repair
Assembly Overview
Brake Pedal, Assembly Overview
Caution!
^
The brake pedal travel must not be restricted by additional floor coverings.
Note:
^
Grease all mountings before installing with grease, Part No. G 000 602.
1. Mounting bracket
2. Self-locking hex nut, 20 Nm (15 ft. lbs.)
3. Brake light switch
^
Before installing brake light switch, connect brake pedal to brake booster push rod. Refer to Brake pedal to brake booster, disconnecting and
connecting.
^
Before installing pull plunger out completely
Installing:
-
Push brake pedal down as far as possible by hand
-
Guide switch through mounting hole (only fits in one position) and secure by turning 90° clockwise
-
Release brake pedal
-
Connect wiring connector
-
Check function of brake lights
4. Accelerator pedal
5. Hex bolt
6. Brake pedal
7. Pad
8. Self-locking hex nut, 20 Nm (15 ft. lbs.)
9. Bushing
10. Pivot pin