GTI V6-2.8L (AFP) (1999)
Brake Pedal Assy: Service and Repair
Removing and Installing
Brake Pedal, Removing And Installing
Additional Information
^
ABS, ABS/EDL On Board Diagnostic (OBD) refer to Powertrain Management; Computers and Control Systems.
Removing
-
Remove trim below instrument panel.
-
Remove screws -1
-
Remove cover -A-.
-
Remove connecting plate between clutch and brake pedals on vehicles with a manual transmission.
-
Remove brake light switch -1-. Refer to Brake pedal, assembly overview.
-
Disconnect accelerator cable.
-
On vehicles with accelerator pedal position sensor, release connector below instrument panel.
-
Disconnect brake pedal from brake booster.
-
Remove hex nuts, item -2-.
-
Remove pedal cluster.
-
Remove brake pedal.
Installing
Install in reverse order of removal.
-
Adjust brake light switch.