GTI V6-2.8L (BDF) (2002)
Front Crankshaft Seal: Service and Repair
Crankshaft oil seal (vibration damper end), replacing
Special tools and equipment
^
3203 Oil seal extractor
^
3266 Sleeve
^
T10069 Counter support
^
T10053/1 Guide sleeve
^
VAG 1601 Torque wrench (150 800 Nm)
^
VAG 1332 Torque wrench (40. 200 Nm)
Removing
-
Remove ribbed belt.
-
Remove vibration damper. To do this, hold vibration damper with counter support T10069.
-
Unscrew inner part of oil seal extractor 3203 three turns (approximately 4 mm) out of the outer part and lock with knurled screw.