GTI V6-2.8L (BDF) (2002)
-
Place sufficient lint-free cloths under the ABS control module and hydraulic unit
-
Remove brake lines -3- on the side of hydraulic unit
CAUTION:
-
DO NOT BEND BRAKE LINES IN THE AREA OF THE HYDRAULIC UNIT.
-
MAKE SURE NO BRAKE FLUID GETS ONTO CONTROL UNIT CONTACTS
-
From the repair kit provided (1J0 998 375) , place red plastic bracket -1- on hydraulic unit and secure in position with yellow plugs -2-
IMPORTANT: If parts from repair kit are being reused, make certain the parts are free of debris and contaminates
NOTE: The red bracket locks the pump motor to the hydraulic unit for later removal of ABS control module
CAUTION: DO NOT REMOVE THE PUMP FROM THE HYDRAULIC UNIT
-
Remove brake fluid lines -1- and -2- and install plugs from kit into hydraulic unit