Jetta L4-1.9L DSL Turbo (BEW) (2004)
-
Loosen ribbed belt by turning tensioner in direction of -arrow-.
-
Block tensioner with mandrel T10060.
-
Remove ribbed belt.
Installing
NOTE:
-
When installing ribbed belts that have already been used, please make sure to mark the running direction during removal.
-
Before installing the ribbed belt, make sure that all subassemblies (generator, a/c compressor, etc.) are securely mounted and turn freely.
-
When installing belt, ensure correct seating in the belt pulleys.
-
Install ribbed belt according to routing diagram.
-
Remove mandrel T10060.
-
Start engine and check belt running.
-
Install engine cover.
-
Install center and right (lower) engine covers (noise insulation).