Volkswagen Workshop Service and Repair Manuals

4

Oil pressure switch (F1), 20 Nm

‹› 1.4 bar, black.

‹› Checking, refer to --> [ Oil Pressure and Switch, Checking ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Engine Oil

Pressure/Testing and Inspection.

5

From intake hose

6

Vent hose

‹› Due to a 4 point lock, only disconnect when the oil filter bracket is to be removed

7

Dust cap

8

Oil filter housing, 25 Nm

‹› Remove and install using the oil filter wrench (3417).

‹› Draining, refer to --> [ Oil Filter Housing, Draining ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Filter Housing/Service

and Repair/Procedures.

9

Seal

‹› Always replace.

‹› Insert when lubricated.

‹› Installation position: Service flag upward.

10

Oil filter element

‹› Drain oil filter housing before removing, refer to --> [ Oil Filter Housing, Draining ] See: Engine, Cooling and Exhaust/Engine/Engine

Lubrication/Oil Filter Housing/Service and Repair/Procedures.

‹› Replacing. 

11

Gasket

‹› Always replace.

12

Oil cooler

‹› See note, refer to --> [ General Repair Information ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Description and

Operation/General Repair Information.

‹› Ensure sufficient clearance to surrounding components.

‹› Coolant hose connection diagram, refer to --> [ Coolant Hose Connection Diagram ] See: Diagrams/Mechanical Diagrams/Cooling

System/System Diagram.

13

Bolt, 25 Nm

14

To thermostat housing

15

Gasket

‹› Always replace.