Jetta V6-2.8L (BDF) (2002)
-
Pull off connectors -arrows- from sender for rotation rate -G202- and sensor for transverse acceleration -G200-.
-
Unscrew bolts -1- and remove sender for rotation rate -G202- and sensor for transverse acceleration -G200-.
Removing and installing sender for rotation rate -G202-
-
Remove nuts -a- on sender for rotation rate -G202- -1-.
-
Take out sender for rotation rate -G202-.
Installing sender for rotation rate -G202-
-
Insert sender for rotation rate -G202- and align straight.
Tighten nuts -a- on sender for rotation rate -G202- -1- .
CAUTION: Strong vibrations can damage Sender for rotation rate -G202-.
Removing sensor for transverse acceleration -G200-