Jetta GLX V6-2.8L (AFP) (2002)
-
Align camshafts with camshaft guide 3268.
-
Prepare cylinder head gasket for assembly.
-
Install cylinder head.
-
Push sliding rail onto bearing bolt. Insert short mounting bolt with "D6" locking compound and tighten both bolts to 20 Nm.
-
Mount camshaft sprocket with camshaft roller chain to camshaft for cylinder bank 1, 3, and 5 (long camshaft) and turn in opposite direction by
hand.
-
Mount camshaft sprocket (with pickup wheel for Hall generator) and camshaft roller chain to camshaft for cylinder bank 2, 4, and 6 and turn in
opposite direction by hand.
Note: Coat contact surfaces of the bolt heads with oil when installing.
-
Remove camshaft guide 3268.
-
Tighten mounting bolts for camshaft sprockets to 100 Nm.
Note: Hold camshaft - arrow - only with open-end wrench SW 24. The camshaft guide 3268 must not be inserted when tightening or loosening the
sprockets.
-
Coat sealing surface of sealing flange with AMV 188 001 02.
-
Coat O-ring for oil passage seal and insert in cover piece.