Jetta Sedan L5-2.5L (BGP) (2005)
-
Remove cover - 1 -.
-
Disconnect electrical connection from Fresh/Recirculating Air Door Motor V154 - 2 -.
-
Remove Fresh/Recirculating Air Door Motor V154 - 2 - from mounting.
Installing
Install in reverse order of removal, noting the following.
NOTE: Always check Fresh/Recirculating Air Door Motor V154 and recirculating air door function after replacing motor.
-
Checking: Use Vehicle Diagnostic, Testing and Information System VAS 5051/5052 in operating mode "Guided Fault Finding".
-
Replacing: Initiate Basic Setting using Vehicle Diagnostic, Testing and Information System VAS 5051/5052 in operating mode "Guided Fault
Finding".
Air Distribution Flap Adjustment Unit, Removing and Installing
Air Distribution Flap Adjustment Unit, Removing And Installing
Removing:
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove instrument panel
-
Unclip flex cable
-
Remove screws - 1 - and remove adjustment unit.
Installing
-
Arrows on toothed gears must align with each other.