volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 11693 > < Procedures|Page 11691
Page 6
background image

-

Unhook brace - 2 - from motor.

Installing

Install in reverse order of removal, noting the following.

‹› After installing, check motor/door function.

‹› Initiate "Basic Setting" function using Vehicle Diagnostic, Testing and Information System (VAS 5051/5052) in operating mode "Guided Fault

Finding" --> [ Climatronic Components, Checking and Adjusting ] See: Testing and Inspection/Component Tests and General
Diagnostics/Climatronic Components, Checking and Adjusting. 

Central Air

Central Air

Removing

CAUTION!
‹› Switch off all electrical consumers.

‹› Switch ignition off and remove ignition key. 

-

Remove instrument panel.

-

Disconnect electrical connection from Central Air Door Motor (V70).

-

Remove screws - 1 - and remove motor.

Procedures|Page 11693 > < Procedures|Page 11691