Jetta Sedan L5-2.5L (CBTA) (2009)
Scuff Plate: Service and Repair
Wheel Housing Trim, Wagon
Sill Panel Trim
Wheel Housing Trim, Wagon
‹› Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Fold the bench seat forward.
-
Remove side upholstery:
‹› with rear side airbags, refer to --> [ Side Upholstery with Side Airbag ] See: Seats/Service and Repair/Rear Seats.
‹› without rear side airbags, refer to --> [ Side Upholstery without Side Airbag ] See: Seats/Service and Repair/Rear Seats.
-
Remove bolt - 1 - (1.5 Nm).
-
Remove clip - 2 - from body flange.
-
Pull trim - 3 - from door seal piping - 4 -.
-
Pull trim out of mounts in sill panel trim - 5 -.
-
Pull out trim in direction of travel under the C-pillar trim panel - 6 -.